Ricoh InfoPrint Manager for AIX, Manual

Page: 280 / 418

Grant appropriate user rights to the domain user on all InfoPrint
Manager Windows servers
To make sure that the Windows InfoPrint Manager servers can run as a Windows
service using the domain userid
ntuser
, you must make sure that this userid has
the proper level of authority on each Windows InfoPrint Manager server system.
1. Log on to one of the systems as a user who is a member of the Domain
Administrators group.
2. Click the Windows Start button and select Settings → Control Panel .
3. In the Control Panel window, double-click the Administrative Tools icon.
4.
In the
Administrative Tools
window, double-click the
Local Security Policy
icon.
5. In the right pane of the Local Security Settings Window, double-click Local
policies .
6.
Double-click User Rights Assignment in the right pane.
7. In the list of user rights, select Act as part of the operating system and
double-click it.
8. In the Local Security Policy Setting dialog, click Add .
9. In the Select Users or Groups dialog, click the arrow on the drop-down list
box and select the domain that your InfoPrint Manager servers exist in.
Find and select the domain user you created, and click
Add .
10.
Click OK in the
Select Users or Groups
dialog.
11. Click OK in the Local Security Policy Setting dialog.
12.
Repeat from step 7 for two other user rights: Create permanent shared
objects and Log on as a service .
Verifying access to the AIX namespace that allows
interoperability on Windows
From each InfoPrint Windows server, you must verify that you have access to the
namespace on the InfoPrint AIX server. You can do this by mapping a network
drive (as
ntuser with the ntuser password from step 5 on page 264) from the
Windows server to the shared namespace on the InfoPrint AIX server.
1. From the main Windows view, right-click the My Network Places icon, select
Map Network Drive . In the dialog, use the Folder field to specify:
\\ aix_servername \var\pddir\default_cell
Where aix_servername is the name of the InfoPrint AIX server.
2. Check the Reconnect at Login check box.
3. Click on the Connect Using Different User Name link.
4. A dialog box will open asking for a username and password associated with
ntuser . Specify the ntuser password from step 5 on page 264 in the Password
field.
5. Click OK and the NFS Client window opens.
6. Click OK again. A small notification window should appear that says NFS
Login Successful
.
Since the NFS Client was set up in the section Configuring the NFS Client to
Access the Namespace , click OK .
7.
Click Yes to accept the current login and Finish to map the drive.
266
InfoPrint Manager for AIX: Procedures