Ricoh InfoPrint Manager for AIX, Manual, Page: 165 / 418

right location on the target server. Also, you need to copy all the ACIF exits
located in
\bin\
( apk*.dll, asciinp*.dll and dbblank.dll ) and the source files
located in
\exits\acif\
directory.
Windows port monitors
To check if there are Windows port monitors, enter this command:
# pdls -c destination -r attachment-type -U <server_name> :
If there is a destination with attachment-type=other-driver , you need to do the
following migration steps for the port monitor:
1. Enter this pdls command:
# pdls -c destination -r device-name -U <server_name>:<ADname>
2. The output will show the name of the port where this DSS sends the data.
3.
From Windows Printers and Faxes , right click one of the printers, select
Properties , and then select the Ports tab.
4. From the list of ports, you need to locate the one that was returned by the
previous
pdl s command. Select it and press the Configure Port button. This
will provide all the details of the port monitor used (port monitor type, IP
address, etc).
5. Install the same port monitor on the target machine and create a port with the
same properties identified in Step 4.
Registry data about psfin
1.
Open the Management Console.
2. Go to Options -> Customize Input Manager .
3. Check if these values are the default ones:
v
Directory for segmet lists:
\var\psf\seglist
v
Directory for segmets and percent usage threshold:
\var\psf\segments 90
v Workspace management: automatic
v
Default segment size: 5000
v Percentage of workspace for retained segments: 5
v
Enable trace: unchecked
4.
If the values match the default ones, no work needs to be done; otherwise, you
need to modify the defaults on the new server also to match the ones from the
source server.
Custom fonts paths
If you use other fonts than the ones shipped with the product, you have to migrate
them.
In order to do this, complete these steps:
1.
Open the Management Console
2. Go to Edit -> Service Configuration .
3.
Locate the Default font search path filed.
If it has a value different than the default one (\fontlib), make sure that the
same path is set on the new server, that it exists, and that it contains the same
fonts as the one on the original server.
Chapter 14. Using the ismu Utility
151