Ricoh InfoPrint Manager for AIX, Manual, Page: 39 / 418

Table 6. Screen Frequencies for InfoPrint 4100 TD1-2 printer with Version 2 Toner and
InfoPrint 4100 TS1, TS2, TS3, TD3-4, TD5-6 printers with Version 7 Toner (continued)
Actual Screen Angle 36° 45° 51° 59°
Configuring InfoPrint Manager to use the InfoPrint Workgroup Printers
(15xx, 16xx, 17xx, 18xx and future models)
These printer models support a variety of data streams and provide a wide range
of finishing options. Depending upon how you plan to use these printers, you
configure them in two different ways:
1. To use Print and Hold functions.
2. To use the Booklet Maker (see “Booklet Maker” on page 27).
Configuring as AIX or PSF Other printers to use Print and
Hold
If you define these printer models as either AIX or PSF Other actual destinations,
you can take advantage of the
Print and Hold functions to enhance printer
throughput.
To pass data streams through InfoPrint Manager to the printer without
transforming them, complete these steps:
1. From the main window of the InfoPrint Manager Administration GUI, select
Printer → Create → AIX or PSF Other destinations.
2. Fill in the necessary fields in the Create Printer Wizard to create an actual
destination for these printers. See “Creating and managing actual destinations”
in
InfoPrint Manager for AIX: Getting Started for detailed instructions. When the
Create Printer Wizard prompts you for a Printer Command, you can specify
one similar to this for the InfoPrint Workgroup Printer:
/usr/lib/lpd/pio/etc/pioinfo 9.99.99.51
where
9.99.99.51
is the printer's IP address. The port for the pioinfo backend
defaults to 9100 and does not have to be specified.
3. If you have created a PSF Other actual destination, select Printer
→
Properties .
Select the Documents tab and make sure that the Formats to RIP at destination
field is set to pass PostScript or PCL data streams.
Using Print and Hold in Workgroup Printers (15xx, 16xx, 17xx,
18xx and future models)
This section describes how you can specify
Print and Hold
functionality from the
command line and how account information is gathered when
Print and Hold
is
active.
Note:
v
If jobs that contain requests for function specific to these printers, such as Print
and Hold function, are sent to printers other than these models, the function is
not honored. In addition, jobs that are transformed by InfoPrint Manager do not
contain the function.
v
If the destination-command attribute is set to pioinfo backend, InfoPrint
Manager disables the auxiliary pages if it detects a Print and Hold job request.
Invoking Print and Hold from the command line:
Chapter 2. Installing and configuring printer devices and related hardware
25
|
|
|||||
|