Ricoh InfoPrint Manager for AIX, Manual

Page: 166 / 418

4. If you have set the resource-context or resource-context-font attributes for any
actual destination to point to a custom path, you have to migrate the custom
path.
5.
If the you have set the above attributes for a default document object, you need
to have the path and fonts on the new server, too.
6. To check the values of these attributes, use the following pdls commands:
#pdls -c destination -r resource-context <server_name>
#pdls -c initial-value-document -r resource-context <server_name>
#pdls -c destination -r resource-context-font <server_name>
#pdls -c initial-value-document -r resource-context-font <server_name>
7. Copy the font folders pointed to by the attributes listed above to the new
server. Also, set the Default font search path field in the Management Console
to match the one from the original server.
Multi-server environment and credentials (user/password)
The Management Console Registry can be seen by opening the Management
Console and selecting
Edit->Service Configuration . There are 8 paths listed there.
The defaults values for them are:
v
Install path:
C:\Program Files\IBM\InfoPrint Manager
v Base namespace path: C:\Program Files\IBM\InfoPrint Manager\var\pddir
v
Remote namespace folder: none
v
Workspace path:
C:\Program Files\IBM\InfoPrint Manager\var\pd
v
AFP support workspace path:
C:\Program Files\IBM\InfoPrint
Manager\var\psf
v
Default fonts search path:
C:\Program Files\IBM\InfoPrint Manager\fontlib
v
Default resource search path:
C:\Program Files\IBM\InfoPrint Manager\reslib
v
Shared client path: none
If you have modified any of these paths, you need to make the same modifications
on the target serve:
1. On the new installation, stop the pdserver and open the Service Configuration
dialog.
2. Change the paths that were customized to match the ones from the original
server.
3.
Copy the contents of the font and resource folder from the original server to
the new one.
4. Start the pdserver .
Management Console “Edit->Service Configuration” checkboxes
1. Open the Management Console.
2. Go to Edit->Service Configuration.
3. Check if the following checkboxes have these default values:
v
Automatically start server during system startup = checked
v
Automatically start IPP gateway during system startup = not checked
v
Confirm object delete = checked
v
Run notification server on this system = checked
v
Run InfoPrint Manager LPD service = checked
152
InfoPrint Manager for AIX: Procedures