Ricoh InfoPrint Manager for AIX, Manual

Page: 312 / 418

You can use the resource-context attribute instead of the resource-context-page-
definition attribute.
5.
Specify the -n 1 option when you start the mvsprsd daemon:
mvsprsd -n 1 -qlp -p6250 -d/mvsdl -x/mvsdl/mvsprpsm.sh
This option directs the daemon to create exactly one child process to receive
data sets from MVS. Most customers use a shell script to run the
mvsprsd
daemon and specify its arguments. Using a shell script ensures that the daemon
is always started correctly, with the same arguments. You should add the
-n 1
option to the shell script.
Limitations of multiple data set support
This support has these limitations:
1.
This solution applies only to line mode, mixed mode, or MO:DCA-P data sets.
2. You must specify the -n 1 option when you start the mvsprsd daemon on AIX.
This support restricts the mvsprsd daemon to receiving one data set at a time.
If you did not previously specify the -n 1 argument and received multiple files
concurrently, you might wish to start more than one instance of the mvsprsd
daemon (using different port numbers) and configure new MVS Download
printers on MVS to communicate with them.
3. You must have enough disk space on the AIX system to receive and transform
all of the data sets in a multiple data set job. If you do not use this solution,
data sets can be received and transformed individually, so less space might be
required.
4.
This solution does not create three types of form definition ( FORMDEF )
statements in the generation of a comprehensive inline form definition:
v
MSU (Map Suppression)
v
PFC (Presentation Fidelity Control)
v
MFC (Medium Finishing Control)
v
PEC (Presentation Environment Control)
v MDR (Map Data Resource)
5. You cannot have inline resources with the same name and different content in
the same job, except for page definitions and form definitions.
6.
The
job-page-count
attribute includes the separator pages when the host
separator page is enabled, but the separator pages are not included in the
job-page-count for any other jobs.
7. When the separator page support is enabled in the host but the data set does
not contain the separator page, the receiver prints the job with InfoPrint
Manager separators. To suppress the InfoPrint Manager separators, you can
perform one of the following options:
v
Change the scripts or exits to set the auxiliary-sheet-selection job attribute to
none permanently.
v Set the printer-start-sheet , printer-separator-sheet , and printer-end-sheet job
attributes to none for the actual destination.
v
Set the auxiliary-sheet-selection job attribute to none for the logical
destination.
Technical description of multiple data set support
This section describes the sequence of the multiple data set support.
1. The MVS Download daemon receives a data set into a file.
298
InfoPrint Manager for AIX: Procedures