Ricoh InfoPrint Manager for AIX, Manual

Page: 232 / 418

Table 30. Default bin mappings
Input tray name AFP bin number PCL bin number
alternate 3 5
bottom 2 4
envelope 65 6
manual 100 2
top 1 1
If these mappings are not appropriate for your printer, reverse the process
described in “Determining bin mappings” on page 209. In this case, the AFP
bin number is the bin number in the data stream and the PCL tray number is
the bin number used by the printer. Note that AFP bin numbers must be
unique, but different AFP bin numbers can map to the same PCL tray number.
2. Open the InfoPrint Manager Administration GUI.
3. Click the printer that you want to set up trays on.
4.
From the
Media/Bins/Trays
tab of the Actual Destination Properties notebook,
in the
Media ready
table, select
Add
to define a new tray or
Modify
to change
an existing one. You can define up to 15 trays.
5. Complete these fields:
Input bin number
This field specifies the AFP bin number.
Media ready
This field shows the medium loaded in the input tray. The drop-down
list lets you select from all media supported by the printer.
Input tray name
This field shows the name associated with the input tray. Standard
names for PCL input trays are:
alternate
envelope
lower
manual
upper
Formerly, these were the only names allowed. You can now use any
name you like, subject to these restrictions:
v
Manual trays must have the string manual somewhere in the name,
in any combination of upper and lowercase, for example,
transparentMANUALa4
. You can define multiple manual trays.
v
Envelope trays must have the string
envelope
somewhere in the
name, in any combination of upper and lowercase, for example,
Number10Envelope
. You can define multiple envelope trays.
Tray number
This field specifies the PCL bin number.
Duplex
This field specifies whether two-sided printing is possible from this
input tray.
6. Click OK .
218
InfoPrint Manager for AIX: Procedures