Ricoh InfoPrint 1767, User Manual

Page: 51 / 178

3
Press repeatedly until
Reports
appears, and then press .
4
Press repeatedly until
Print Fonts
appears, and then press .
5 Press repeatedly until appears next to PCL Fonts , PostScript Fonts , or PPDS Fonts , and then
press .
After the font sample list prints,
Ready
appears.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and
Ready
appears.
2
From the control panel, press .
3 Press until Reports appears, and then press .
4
Press until
Print Directory
appears, and then press .
Printing Directory List
appears. After the directory list prints,
Ready
appears.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and while turning the printer on.
3
Release the buttons when the clock appears, and wait for
CONFIG MENU
to appear.
4
Press until Prt Quality Pgs appears, and then press .
The print quality test pages print.
5
Press until
Exit Config Menu
appears, and then press .
Resetting the Printer
appears briefly, followed by a clock, and then
Ready
appears.
Canceling a print job
There are several methods for canceling a print job. The following sections explain how to cancel a print job from
the control panel or from a computer (depending on the operating system).
Canceling a print job from the control panel
If the job is formatting or already printing, and Cancel a job appears on the first line of the display:
1
Press until
Cancel
appears.
A list of jobs appears.
2
Press until appears next to the job you want to cancel, and then press .
Canceling <filename>
appears.
51