Ricoh InfoPrint 1767 User Manual Download Page 117

Page: 117 / 178

54 Serial option <x> error

•

Check that the serial cable is connected correctly and is the proper one for the serial port.

•

Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and host computer.

•

Press

until

Continue

appears, and then press

to continue printing.

•

Turn the printer power off and then back on to reset the printer.

54 Standard network software error

•

Press

until

Continue

appears, and then press

to continue printing.

•

Turn the printer power off and then back on to reset the printer.

•

Upgrade (flash) the network firmware in the printer or print server.

54 Network <x> software error

•

Press

until

Continue

appears, and then press

to continue printing.

•

Turn the printer power off and then back on to reset the printer.

•

Upgrade (flash) the network firmware in the printer or print server.

55 Unsupported option in slot <x>

Turn the printer power off.

Unplug the power cord from the wall outlet.

Remove the unsupported optional interface card or internal print server from the printer system board. For more
information, see the

User's Guide on the Software and Documentation CD.

Connect the power cord to a properly grounded outlet.

Turn the printer power back on.

56 Parallel port <x> disabled

•

Press

until

Continue

appears, and then press

to clear the message.

The printer discards any data received through the parallel port.

•

Make sure the Parallel Buffer menu item is not set to Disabled.

56 Serial port <x> disabled

•

Press

until

Continue

appears, and then press

to clear the message.

The printer discards any data received through the serial port.

•

Make sure the Serial Buffer menu item is not set to Disabled.

56 Standard USB port disabled

•

Press

until

Continue

appears, and then press

to clear the message.

The printer discards any data received through the USB port.

•

Make sure the USB Buffer menu item is not set to Disabled.

117

Summary of Contents for InfoPrint 1767



















































































































































































Search results

Summary of Contents for InfoPrint 1767

Reviews:

Related manuals for InfoPrint 1767

Brands by name

Popular brands

Ricoh InfoPrint 1767, User Manual

Search results

Summary of Contents for InfoPrint 1767

Reviews:

Related manuals for InfoPrint 1767

Brands by name

Popular brands