Ricoh InfoPrint 1767, User Manual

Page: 112 / 178

Load staples <x>
•
Replace the specified staple cartridge in the finisher.
Note: To learn how to replace the specified staple cartridge, press repeatedly until the
Show Me
message
for the specified staple cartridge appears, and then press .
•
Press repeatedly until Continue appears, and then press to clear the message and continue printing.
•
Cancel the print job.
Menus are disabled
The printer menus are disabled. The printer settings cannot be changed from the control panel. Contact your system
support person for help.
Note: When menus are disabled, it is still possible to cancel a print job, print a confidential job, or print a held job.
Network/Network <x>
The printer is connected to the network.
Network
indicates that the printer is using the standard network port built into the printer system board.
Network
<x>
indicates that an internal print server is installed inside the printer or that the printer is connected to an external
print server.
No held jobs
Wait for the message to clear.
No jobs to cancel
Wait for the message to clear.
No recognized file types
Either there are no files saved on the USB drive, or the files saved are not supported. Convert files to any of the
following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.
Power Saver
The printer is saving power while it waits for the next print job.
•
Send a job to print.
• Press to warm the printer to normal operating temperature. Afterwards, Ready appears.
Printer locked, enter PIN to unlock
The control panel is locked. Enter the correct PIN to unlock it.
Printing
Wait for the message to clear.
Programming disk DO NOT POWER OFF
Wait for the message to clear.
Warning:
Do not turn the printer power off while Programming disk appears on the display.
Programming flash DO NOT POWER OFF
Wait for the message to clear.
112