Ricoh InfoPrint 1767, User Manual

Page: 151 / 178

Check the paper guides
Move the guides in the tray to the correct positions for the paper size loaded.
Has the paper absorbed moisture due to high humidity?
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
Print jobs are not routed to the booklet-maker bin
These are possible solutions. Try one or more of the following:
Check the paper
Make sure the paper is loaded in a 520-sheet tray or the multipurpose feeder. If the paper is loaded in the
multipurpose feeder, make sure it is loaded short-edge first.
Note: Do not load A4- or letter-size paper in the multipurpose feeder.
Is the letter- or A4-size paper loaded in a 520-sheet tray?
The finisher will not accept letter- or A4-size paper from the multipurpose feeder. Load letter- or A4-size paper in
the short-edge orientation in a 520-sheet tray.
Make sure the paper size is supported by the booklet-maker bin (Bin 2)
Use one of the following paper sizes supported by Bin 2: A3, A4, B4, folio, legal, letter, or tabloid (11 x 17 in.).
Paper jam message remains after jam is cleared
The paper path is not clear. Clear jammed paper from the entire paper path, and then press .
Page that jammed does not reprint after you clear the jam
In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:
1
Press .
2
Press until
Settings
appears, and then press .
3 Press until Setup Menu appears, and then press .
4
Press until
Print Recovery
appears, and then press .
5
Press until
Jam Recovery
appears, and then press .
6 Press until On or Auto appears, and then press .
151