Ricoh InfoPrint 1767, User Manual

Page: 50 / 178

3
Press until appears next to the document you want to print, and then press .
Note:
Folders found on the flash memory device appear as folders. File names are appended by the extension
type (for example, .jpg).
4 Press to print one copy, or enter the number of copies using the keypad, and then press to initiate the print
job.
Note: Do not remove the USB flash memory device from the USB Direct interface until the document has finished
printing.
If you leave the USB flash memory device in the printer after leaving the initial USB menu screen, you can still
print .pdf's from the USB flash memory device as held jobs.
Printing information pages
Printing a menu settings page
Print a menu settings page to review the current menu settings and to verify printer options are installed correctly.
1
Make sure the printer is on and
Ready
appears.
2
From the control panel, press .
3
Press until Reports appears, and then press .
4
Press until
Menu Settings Page
appears, and then press .
Printing Menu Settings
appears. After the menu settings page prints,
Ready
appears.
Printing a network setup page
If the printer is attached to a network, print a network setup page to verify the network connection. This page also
provides important information that aids network printing configuration.
1
Make sure the printer is on and
Ready
appears.
2
From the control panel, press .
3
Press until
Reports
appears, and then press .
4
Press until
Network Setup Page
appears, and then press .
After the network setup page prints,
Ready
appears.
Note: If an optional internal print server is installed,
Print Network <x> Setup Page
appears.
5 Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning.
Consult a system support person for a solution, and then print another network setup page.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and
Ready
appears.
2 From the control panel, press .
50