Ricoh HL-F1, Field Service Manual

Page: 32 / 296

Location of screw Screw type Q'ty
Tightening torque
N•m (kgf•cm)
Main frame R Taptite, bind B M4x12 3 0.78 ±0.1 (8 ±1)
Preparation
Prior to proceeding with the disassembly procedure,
1. Unplug
- the modular jack of the telephone line,
- the USB cable, if connected (not shown below), and
- the modular jack of the external telephone set if connected (not shown below).
How to Access the Object Component
On the next page is a disassembly flowchart which helps you access the object components. To remove
the fixing unit, for example, first find it on the flowchart and note its name ("Fixing Unit"). To access it, you
need to remove all the parts above the fixing unit on the flowchart ("Back Cover" "Rear Chute Cover"
"Side Cover R/Link Stopper" "Top Cover") before the unit itself can be removed.
Unless otherwise specified, all parts should be replaced in the reverse order to which they were removed
to reassemble the machine.
4. Replacement and Adjustment
30
4