Ricoh HL-F1, Field Service Manual

Page: 182 / 296

• Selector 7 is applicable to models equipped with ADF units.
• Selector 2: ITU-T (CCITT) superfine recommendation
If this selector is set to "1," the machine communicates in ITU-T (CCITT) recommended superfine mode
(15.4 lines/mm). If it is set to "0," it communicates in native superfine mode.
• Selector 7: Max. document length limitation
This selector is used to select the maximum length of a document to be sent.
• Selector 8: "Stop" key pressed during reception
If this selector is set to "1," pressing the "Stop/Exit" key can stop the current receiving operation. The
received data will be lost.
WSW17 (Function setting 2)
Selector No. Function Setting and Specifications
1
2
Off-hook alarm
No. 1 2
0 0 : No alarm
0 1 : Always valid
1 X : Valid except when 'call
reservation' is selected.
3
4
Not used. -
5 Calendar clock type 0: U.S.A. type 1: European type
6 Not used. -
7 Non-ring reception 0: OFF 1: ON
8 Not used. -
• Selectors 1 and 2: Off-hook alarm
These selectors activate or deactivate the alarm function which sounds an alarm when the
communication is completed with the handset being off the hook.
• Selector 5: Calendar clock type
If this selector is set to "0" (USA), the MM/DD/YY hh:mm format applies; if it is set to "1" (Europe),
the DD/MM/YY hh:mm format applies: DD is the day, MM is the month, YY is the last two digits of
the year, hh is the hour, and mm is the minute.
5. Service Maintenance
180
5