Ricoh HL-F1, Field Service Manual

Page: 294 / 296

Code 1 Code 2 Causes
80 01 Fallback impossible
9. Signal isolation
Code 1 Code 2 Causes
90 01
Unable to detect video signals and commands within 6 seconds after
CFR is transmitted.
90 02 Received PPS containing invalid page count or block count.
10. Video signal reception
Code 1 Code 2 Causes
A0 03
Error correction sequence not terminated even at the final transmission
speed for fallback.
A0 11 Receive buffer empty. (5-second time-out)
A0 12 Receive buffer full during operation except receiving into memory.
A0 13 Decoding error continued on 500 lines.
A0 14 Decoding error continued for 10 seconds.
A0 15 Time-out: 13 seconds or more for one-line transmission.
A0 16 RTC not found and carrier OFF signal detected for 6 seconds.
A0 17 RTC found but no command detected for 60 seconds.
A0 18 Receive buffer full during receiving into memory.
A0 19 No video data to be sent
A0 20
Unable to continue to receive color FAX (Remaining ink
insufficient)
A8 01 RTN, PIN, or ERR received at the calling terminal. *
A9 01 RTN, PIN, or ERR received at the called terminal. *
* Available in German models only
11. General communications-related
2. Appendix: Troubleshooting Guide
38
2