Ricoh HL-F1, Field Service Manual

Page: 181 / 296

1
2
Redial interval
No. 1 2
0 0 : 5 minutes
0 1 : 1 minute
1 0 : 2 minutes
1 1 : 3 minutes
3 to 6 No. of redialings
No. 3 4 5 6
0 0 0 0 : 16 times
0 0 0 1 : 1 times
0 0 1 0 : 2 times
0 0 1 1 : 3 times
1 1 1 1 : 15 times
7 Not used. -
8 CRP option 0: Disable 1: Enable
• Selectors 1 through 6: Redial interval and No. of redialings
The machine redials by the number of times set by selectors 3 through 6 at intervals set by selectors
1 and 2.
• Selector 8: CRP option
If a command error occurs in the machine (calling station), the machine usually waits for three seconds
and then makes a retry three times. This CRP option is a request command that can be sent from the
called station for requesting the calling station to retry the failed command immediately.
WSW16 (Function setting 1)
Selector No. Function Setting and Specifications
1 Not used. -
2 ITU-T (CCITT) superfine recommendation 0: OFF 1: ON
3 to 6 Not used. -
7 Max. document length limitation 0: 400 cm 1: 90 cm
8 "Stop/Exit" key pressed during reception 0: Not functional 1: Functional
Firmware Switches (WSW)
179
5