Ricoh G081, Service Manual

Page: 49 / 272

MACHINE INSTALLATION
SM 1-21 G081/G092
Installation
1.2.10 INSTALLING THE PRINTER DRIVERS AND UTILITIES
Install the printer drivers and software using the CD-ROM labeled “Printer Drivers
and Utilities.” The supported operating systems are Windows 95/98/Me, Windows
2000, Windows XP and Windows NT 4.0. (The procedure below may vary slightly
from the procedure you experience based on software version.)
Click Quick Install to install PCL5c and RPCS printer drivers.
When the TCP/IP protocol is used, SmartNet-Monitor for Client will be installed as
well. When using with TCP/IP protocol, confirm the following:
•
The printer is connected to a network with the network interface cable.
• TCP/IP protocol is set up.
•
The IP address is set for the printer and the computer.
To install the PostScript3 printer driver, click the PostScript3 printer driver button.
For more information about the PostScript3 printer driver, see the Administrator
Reference or the Client Reference manual included on the CD-ROM labeled
“Operating Instructions”.
1.
Insert the CD-ROM labeled “Printer Drivers and Utilities” into the CD-ROM
drive. Auto Run will start the installer.
2. Select a language, then click [OK]. The following languages are available:
Cestina (Czech), Dansk (Danish), Deutsch (German), English (English),
Espanol (Spanish), Francais (French), Italiano (Italian), Magyar (Hungarian),
Nederlands (Dutch), Norsk (Norwegian), Polski (Polish), Portugues
(Portuguese), Suomi (Finnish), Svenska (Swedish). The default interface
language is English.
3. Select Quick Install. The software license agreement appears in the License
Agreement dialog box.
4.
After reading the contents, click “I accept the agreement”, then click Next.
5. In the “Select Printer” dialog box, select the printer model you want to install.
NOTE: 1)
For a network connection with TCP/IP, select the printer whose IP address
is displayed in “Connect to”.
2)
For parallel connection, select the printer whose printer port is displayed in
“Connect to”.
6. Click [Install]. When finished, the Installation Completion dialog box appears.
NOTE: 1)
Under Windows 2000, the Digital Signature Not Found dialog box may
appear when installing the printer driver. In this case, click Yes to continue
the installation.
2)
Under Windows XP, the Hardware Installation dialog box may appear. In
this case, click Continue Anyway to continue the installation.
7. Click [Finish].
NOTE: A message telling you to restart the computer may appear. In this case,
restart your computer to complete the installation. If no message
appears, go to step 5.
8. Click Exit. The installation is now complete.