Ricoh G081, Service Manual

Page: 159 / 272

USER PROGRAM MODE
SM 5-35 G081/G092
Service
Tables
5.6 USER PROGRAM MODE
Press the “Menu” button and use the “Up/Down arrow” keys to scroll through the
menu listing. To go back to a higher level, press the “Escape” key. After changing
the settings, press the “On Line” key. The user menu list can be printed using
“Menu List” in the “List/Test Print” user mode. (For those functions shown with an
asterisk and number, refer to the “Notes” shown below.)
User Menu Chart
Category Function Menu Category Function Menu
Counter *1 Auto Continue
Sample Print *2 Memory Overflow
Locked Print *2 Copies
Bypass Size Printer Lang.
Paper Type Sub Paper Size
Tray Locking Page Size
Paper Input
Tray Priority Duplex *6
Config. Page Energy Saver 1
Menu List Energy Saver 2
Color Demo Page Unit of Measure
PS Config. Page Resolution
PCL Config. Page B& W Detect
List/ Test Print
Hex Dump
System
Spool Printing *2
Color Regist. I/ O Buffer
Image Density I/ O Timeout
Registration Network Setup
Plain Paper Type IEEE 1394 Setup *7
Maint. Reset IEEE 802.11b *4
HDD Format *2
Host Interface
USB Setup
ROM Update *3 Orientation
4C. Graphic Mode Form Lines
WL. LAN Signal *4 Font Source
WL. LAN Defaults *4 Font Number
Print Area Point Size
Key Repeat Font Pitch
Menu Protect *5 Symbol Set
Maintenance
Series Print. Job *5 Ext. A4 Width
MisfeedRecovery
PCL Menu
Append CR to LF
System
Prt. Err Report Language
NOTE: *1. Meter charge mode must be ON in SP mode.
*2. Option HDD required
*3. ROM Update is not currently used.
*4. IEEE802.11b option required
*5. Displayed after pressing [Enter], [Escape] and then [Menu]
*6. Duplex unit option required.
*7. IEEE1394 option required.