Ricoh G081, Service Manual

Page: 125 / 272

SERVICE PROGRAM MODE
SM 5-1 G081/G092
Service
Tables
5. SERVICE TABLES
5.1 SERVICE PROGRAM MODE

CAUTION
Before accessing the service menu, do the following:
Confirm that there is no print data in the printer buffer (the Data In LED
must not be lit or blinking).
If there is some data in the buffer, wait until all data has been printed.
5.1.1 SERVICE MODE OPERATION
NOTE: The Service Program Mode is for use by service representatives only so
that they can properly maintain product quality. If this mode is used by
anyone other than service representatives for any reason, data might be
deleted or settings might be changed. In such case, product quality cannot
be guaranteed any more.
Entering the Service Mode
There are two ways to enter the service mode.
Method 1:
Turn the machine on while pressing the “On Line” key and “Escape” key
together until “SYSTEMver V.X.xx 1. Service” appears on the display.
NOTE: If you switch the machine off, any jobs stored on the hard disk using the
sample print and protected print features will be deleted.
Check first with the user tools to see if there are any jobs stored using
these features
(Menu key - Sample Print, or Protected Print).
Method 2: Press the “Up/Down arrow” keys together for about 5 seconds, release,
then immediately press the “Enter” key.
The same message as described in Method 1 is displayed.
NOTE: The machine automatically goes off line when you enter the service mode.
On Line Menu Escape
#
Enter
Power Error Data In
G081S001.WMF
SYSTEMver V.X.xx
1.Service