Ricoh G081, Service Manual

Page: 34 / 272

MACHINE INSTALLATION
G081/G092 1-6 SM
10. Push the green lever to fasten the
inner cover [A].
11. Locate and remove the Waste Toner
Bottle from its shipping materials.
12. Install the Waste Toner Bottle in the
appropriate location below the
photoconductor units (label-side out).
13. Slide the green locking lever to the
locked position.
NOTE: Refer to the Operating
Instructions Maintenance Guide, page 32, for added details.
14. Close the right cover [B] of the printer
slowly. The Waste Toner Bottle will
automatically be pushed upwards into
its proper position.
NOTE: You may wish to save the
lower photoconductor unit
covers and “light-proof”
photoconductor unit shipping
bags to use should removal of
these units become necessary
for servicing.
1.2.2 INSTALLING THE TONER CARTRIDGE
1. Open the upper left cover [A] of the
printer.
2. Remove the packing tape and foam
strips, attached to the tape, located
inside.
G081I420.WMF
G081I430.WMF
G081I441.WMF
[A]
[B]
[A]