Ricoh G081, Service Manual

Page: 144 / 272

PRINTER ENGINE SERVICE MODE
G081/G092 5-20 SM
5 Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[SMC print]
1 All
2 SP
Mode
4 Logging
6 Non-Default
990*
7 NIB Summary
Prints SP setting data.
[0 ~ 255 /
0 / 0 /step]
• SP all print: All items printed out with SPs 5-990-2, -4,
-6, and -7.
•
All: All SP mode settings
•
Non-Default: SP settings that have been changed
from the defaults
[Jam OFF] Jam ON/OFF 991
1 Jam OFF Enables or disables jam detection.
[ 0 or 1 /
0 / – ]
0: Enable
1: Disable
[Line Adj.] Line Point Adjustment
1
# Timing(pages) The automatic line position adjustment is done after
printing the number of pages that is set with this SP.
[ 0 ~ 2000 /
250 / 1/page ]
NOTE: 0: Never done
993
2 Manual Use to make a line position adjustment.
[Eng Err Stat] Engine Error Status 994
1 (7) 00000000 (0)
Display the engine error status.
Bit 7: The fuse did not blow after installing a new PCU(K)
Bit 6: The fuse did not blow after installing a new
PCU(YMC)
Bit 5: By-pass tray and duplex unit motor error
Bit 4: The color registration sensor cannot be calibrated.
Bit 3: Cannot measure the color registration sensor
value.
Bit 2: Cannot correct the color registration.
Bit 1: PCU(YMC) home position error.
Bit 0: Not used
[Skew Adj.] Skew Adjustment 995
#
1 Skew Adj. Select color skew correction ON or OFF.
[ 0 or 1 /
1 / - ]
0: Off, 1: On
[ENG Mem Clear] Engine Memory Clear 998
2 Color Mis-Reg Clears the correction values for the color registration. Do
this SP mode after replacing the color registration board.
The correction values are set after the main power has
been turned on.