Ricoh G081, Service Manual

Page: 200 / 272

PRINT PROCESS
G081/G092 6-38 SM
6.3.12 PAPER EXIT AND PAPER SWITCHBACK
Normal Printing Mode (Non-Duplex Printing Mode)
[A]: Paper path switching guide
[B]: Switching lever
[C]: Paper exit roller [D]: Double teeth gear
[E]: Switchback solenoid
[F]: Switching lever
Paper transport
After fusing, the paper exit roller [C] feeds the printed paper to the exit tray. The BK
motor drives the double teeth gear [D], which drives the paper exit roller gear. The
arrows indicate the rotation direction of the gears.
Sensors
The paper actuates the paper exit sensor when it reaches the paper exit roller. If
the paper does not actuate the sensor at the correct time, an error message
appears. If the paper continues to actuate the sensor for an extended time, another
message appears.
The printed paper is sent to the exit tray face down. The paper overflow sensor is
below the paper exit roller. This sensor detects whether the output tray is full. If the
tray is full, a message appears on the display.
G081D912.WMF
[A]
[B]
[C]
[D]
[E]
[F]