Ricoh G081, Service Manual

Page: 272 / 272

PRINTER CONTROLLER SERVICE MODE
G081/G092 5-6 SM
Bit Switch 1 (Japan only)
Bit Function Default
0 Key protect [0: Not activated, 1: Activated] DFU 0
1 (Not used.) DFU 0
2 (Not used.) DFU 0
3 (Not used.) DFU 0
4 (Not used.) DFU 0
5 (Not used.) DFU 0
6 (Not used.) DFU 0
7 Emulation print area (RPCS only). [0: Not printed, 1: Printed] DFU 0
Bit Switch 2
Bit Function Default
1 Overlap job mode (njob) [0: Not activated, 1: Activated] DFU 0
3 PDL Sniffing - See PUB(C)-051 for details. [ 0: Enabled , 1: Disabled] 0
Bit Switch 3
Not used
Bit Switch 4 (Japan only)
Bit Function Default
0
Background areas of simple graphics (RPDL, R16, R55, R98) [0: Not
painted, 1: Painted]
DFU
0
1 Unknown 2-byte characters (R98) [0: Cleared, 1: Not cleared] DFU 0
2
Specifies portrait/landscape reset (R16) [0: Reset by the reset
command, 1: Not reset by the reset command]
DFU
0
3 Changes line thickness adjustment mode [0: Mode 1, 1: Mode 2] DFU 0
4
Displays or not displays error messages No. 84 through DF (RPDL,
R16, R55, R98, GL/GL2). [0: Displays, 1: Not displays]
DFU
0
5
Displays or not displays error messages No. E1 and higher (RPDL, R16,
R55, R98, GL/GL2). [0: Displays, 1: Not displays]
DFU
0
6 Changes the tray setting (GL/GL2). [0: LP, 1: MFP] DFU 0
7 Changes the default tray. [0: LP (Tray 1), 1: MFP (System default)] DFU 0
Rev. 10/2003
⇒