Ricoh D093, Service Manual

Page: 393 / 779

Main SP Modes
SM 6-85 D093/D094
Syste
m
Ma
in
te
na
n
ce
Ref
eren
ce
41
Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it to the new HDD. However, the new
address book on the HDD can be accessed only by the system administrator at
this stage. Executing this SP by the service technician immediately after power
on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
However, at this point the address book can be accessed by only the
system administrator or key operator.
5. Enter the SP mode and do SP5846-41. After this SP executes successfully,
any user can access the address book.
43
Addr Book Media
This SP displays the media where the address book currently in use is stored.
[0 to 30 / 0 /1]
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
20: HDD
30: Nothing
47
Initialize Local Addr Book
Clears all of the address information from the local address book of a machine
managed with UCS.