Ricoh D093 Service Manual Download Page 63

Page: 63 / 779

Overview

SM 2-21

D093/D094

Product

Inform

ation

NUMBER

NAME

DESCRIPTION

Motors

Cassette Feed Motor

This stepper motor controls the paper feed

roller in the paper cassette.

Cooling Fan Motor

This is an exhaust fan for the area around the

drum.

Cutter Motor

This controls the cutter in the roll feeder.

Drum Motor

This controls the OPC drum.

M5 Fusing

Motor

This controls the hot roller, fusing exit rollers,

and upper exit rollers.

M6 Main

Motor

This controls the registration roller,

development unit, and the agitator in the toner

cartridge.

PCB Cooling Fan

Motor 1

Cools the SIPU, MCU and controller board.

PCB Cooling Fan

Motor 2

Cools the SIPU, MCU and controller board.

Roll Feed Motor

This controls the feed rollers for roll 1 and roll

2 in the roll feeder.

M10 Scanner

Motor

This controls the original feed rollers and

original exit rollers.

M11

Used Toner Bottle

Motor

This controls the mechanism that keeps the

level of used toner in the bottle flat.

M12

Wire Cleaner Motor

This moves the corona wire cleaner to the left

and right to clean the charge corona wire.

Summary of Contents for D093












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D093

Reviews:

Ricoh D093, Service Manual, Page: 63 / 779

Search results

Summary of Contents for D093

Reviews: