Ricoh D093 Page 304 Service Manual Download

Page: 304 / 779

Firmware Update

D093/D094 5-122

5.13 FIRMWARE UPDATE

5.13.1 OVERVIEW

The MCU (Main Control Unit) board flash-memory contains the software for this machine. To

upgrade the software, .SD cards are necessary. The SD cards contain the SCU and ECU

firmware.

Always turn the main power switch off before you insert or remove an SD card.

Keep the main switch on during software installation.

Store and handle SD cards carefully to protect them from heat, humidity, and sunlight.

Before you handle SD cards, touch a grounded surface to discharge static electricity

from your hands.

5.13.2 UPDATING FIRMWARE

1. Turn the operation power switch off.

2. Wait for the power LED to go off, then switch the main power switch off.

3. Remove the SD slot cover [1] (

x1).

4. Insert the SD card [2] with the firmware in SD card Slot 2. (If there is an SD card in Slot 2,

remove it.)

5. Turn on the main power switch. "Program to start firmware update" appears on the

operation panel display.

Summary of Contents for D093












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D093

Reviews:

Related manuals for D093

Brands by name

Popular brands

Ricoh D093, Service Manual

Search results

Summary of Contents for D093

Reviews:

Related manuals for D093

Brands by name

Popular brands