Ricoh D093 Page 392 Service Manual Download

Page: 392 / 779

Main SP Modes

D093/D094 6-84

Addr Book Migration (SD -> HDD)

This SP moves the address book data from an SD card to the HDD. You must

turn the machine power off and on after executing this SP.

1. Turn the machine off.

2. Install the HDD.

3. Insert the SD card with the address book data in SD card Slot C3.

4. Turn the machine on.

5. Do

SP5846-40.

6. Turn the machine off.

7. Remove the SD card from SD card Slot C3.

8. Turn the machine on.

Notes

Executing this SP overwrites any address book data already on the HDD

with the data from the SD card.

We recommend that you back up all directory information to an SD card with

SP5846-51 before you execute this SP.

After the address book data is copied to HDD, all the address book data is

deleted from the source SD card. If the operation fails, the data is not erased

from the SD card.

Summary of Contents for D093












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D093

Reviews:

Related manuals for D093

Brands by name

Popular brands

Ricoh D093, Service Manual

Search results

Summary of Contents for D093

Reviews:

Related manuals for D093

Brands by name

Popular brands