background image

Service Call Tables 

D093/D094 7-28 

SM 

 

636-1  D 

SD Card Error 

CTL

 

 

 

Expanded authentication module error 

 

 

ƒ

 

No expanded authentication module in the machine. (Install expanded 

authentication module.) 

ƒ

 

Expanded authentication module file is corrupted. 

ƒ

 

Expanded authentication module SD card is damaged. 

ƒ

 

No DESS module in the machine. (Install DESS module.) 

636-2 D  Version 

Error 

CTL

 

 

 

The version of the expanded authentication module is not correct. 

 

 

ƒ

 

Install the correct file of the expanded authentication module. 

 

SC641 

D  Engine-Controller Communication Error: No Response 

CTL

 

 

 

There was no response to a frame sent from the controller board to the 

engine. 

 

 

ƒ

 

Cycle the machine off/on. 

 

650 

@Remote communication errors 1 

CTL

 

650-1  

Authentication 

error 

 

 

Authentication for Cumin-M failed at a dial up connection. 

 

 

ƒ

 Incorrect 

SP 

settings 

ƒ

 

Disconnected telephone line 

ƒ

 

Disconnected modem board   

ƒ

 

Check and set the correct user name (SP5816-156) and password 

(SP5816-157). 

650-4   

Incorrect modem setting 

 

 

ƒ

 

Dial-up failed due to incorrect modem setting. (Possible causes same 

as 650-1 above.) 

 

 

ƒ

 

Check, correct modem settings (SP5819-160) 

Summary of Contents for D093












































































































































































































































































































































































































































































































































































































































































































































































































Reviews: