15
1
Preparing the Software
You can delete all the software that has been installed. To
reinstall the software, follow the uninstallation procedure first
before installing the software again.
• Exit all active applications and save important data before
uninstalling the software.
• Disconnect any other USB equipment or Plug and Play devices
connected to the PC.
• If you connect or disconnect the camera with a PC using the USB
cable before installing the USB Driver, the PC may not recognize
the camera. In this case, delete the USB Driver from the system and
then reinstall it.
m
m
m
m
See "Deleting the USB Driver" (p.70).
See "To install the Caplio RR10 Software" (p.11).
■
To Delete the Caplio RR10 Software
You can delete all the software that has been installed from
Caplio RR10 Software, such as RICOH Gate, USB Driver,
Video Driver, etc.
1
Turn the PC on and start up Windows.
2
Click on [Start] on the Windows task bar.
3
Move the pointer to [Settings] and select
[Control Panel].
The control panel will be displayed.
Uninstalling the Software
Important
Note
Summary of Contents for Caplio RICOH Gate for Windows
Page 20: ...18...