Ricoh Aficio BP20N Page 63 User Manual Download

Page: 63 / 249

SING

RINT

ATERIALS

Prepare a stack of paper for loading by flexing or fanning
the paper back and forth. Straighten the edges on a level

surface.

Place paper on the centre of the tray

with the print side

face up

. Pay attention to the paper limit mark on the left

inside wall of the tray. Paper overloading may cause paper

jams.

If you want to print on previously printed paper from the

Multi-Purpose Tray, the printed side should be facing down

with an uncurled edge to the printer. If you experience

problems with paper feed, turn the paper around.

OTE

Make sure that you have not loaded too much print

material. The print material buckles if you load a stack that is too

deep or push it in too far.

Summary of Contents for Aficio BP20N


























































































































































































































































Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands

Ricoh Aficio BP20N, User Manual

Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands