Ricoh Aficio BP20N Page 72 User Manual Download

Page: 72 / 249

SING

RINT

ATERIALS

Printing on Transparencies

Open the Multi-Purpose Tray and the rear output tray.

Load transparencies

with the print side up

, and

the top

with the adhesive strip entering the printer first

Guidelines

• Only use transparencies recommended for use in laser

printers.

• Ensure that transparencies are not wrinkled, curled, or have

any torn edges.

• Hold the transparencies by the edges and avoid touching the

print side. Oils deposited on the transparency can cause print

quality problems.

• Be careful not to scratch or leave fingerprints on the print side.

Summary of Contents for Aficio BP20N


























































































































































































































































Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands

Ricoh Aficio BP20N, User Manual

Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands