Ricoh Aficio BP20N User Manual Download

Page: 216 / 249

Page 3-16

System Administration Guide

etw

llat

ion U

ing

Inte

(

DSm520pf/AC122/AC205

)

IPP

Use these instructions to setup IPP using Web Image Monitor

DSm520pf/AC122/AC205

NOTE:

The HTTP settings for the device will have been setup when completing the

Enabli

ng Web Image Monitor

DSm520pf/AC122/AC205

section.

To complete the installation of the device, perform these steps:

Enable Web Image Monitor (see

“Enabling Internet Services” on page 3-5

At the Web Image Monitor Home Page for the

DSm520pf/AC122/AC205

, select the

[Network

Settings]

tab.

In the Network Settings, select [

[Raw TCP/IP, LPR, IPP]

Select the checkbox to enable IPP.

Check the

IPP Configuration

details are correct. If any of the details are incorrect then

enter

the required configuration details in the appropriate boxes.

In the IPP tab, configure the parameters.

Printer URI: Enter the URL of the printer using the following format:

ipp://the IP address of the printer or http://the IP address of the printer:631

(Ex:ipp://168.10.17.82 or http://168.10.17.82:631) 631 is the IPP port number.

•

Printer Name

: Enter the network printer’s name to use with the IPP printing.

•

Operator message

: Enter the printer information for printer users.

•

Printer Location

: Enter the name of the location where the printer is physically

located.

•

Printer Information

: Enter additional information about the printer.

•

Multiple Operation Timeout

: Enter the time the printer ends a print job. When

there is no incoming data after the specified number of seconds, the printer ends
the reception.

•

Time to Keep Jobs in History

: Set the length of time the IPP printer keeps the job

information.

Click the

[Apply]

button to implement any changes.

NOTE:

Click the

[Undo]

button to cancel any changes made and return to the

previous values.

Summary of Contents for Aficio BP20N


























































































































































































































































Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands

Ricoh Aficio BP20N, User Manual

Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands