Ricoh Aficio BP20N User Manual Download

Page: 17 / 249

NTRODUCTION

Understanding the Control Panel

Online/Error and Toner Save LEDs

LED

Description

If the

Online/Error

lights green, the printer is ready to

print.

If the

Online/Error

lights red, the printer is experiencing an

error, such as jammed paper, no paper, open cover, or

uninstalled toner cartridge. See “Troubleshooting Error

Messages” on page 6.21.

If you press the

Cancel

button while the printer is receiving

data, the

Online/Error

LED blinks red to cancel printing.

In Manual Feed mode, if there is no paper in the Multi-purpose

tray, the

Online/Error

LED blinks red. Load paper into the

Multi-purpose tray and the LED stops blinking.

If the printer is receiving data, the

Online/Error

LED slowly

blinks green.

If the printer is printing the received data, the

Online/Error

LED blinks green fast.

If the toner cartridge is near the end of its life, the

Online/

Error

LED lights orange.

If the toner cartridge is empty, the

Online/Error

LED blinks

orange.

If the installed toner cartridge is not designed for your printer,

the

Online/Error

LED blinks orange and red alternately.

Summary of Contents for Aficio BP20N


























































































































































































































































Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands

Ricoh Aficio BP20N, User Manual

Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands