4
4-8
Setting up the Fiery 3850C from a Windows Computer
Ethernet (Port Setup)
Enable Ethernet
—Select if the Fiery 3850C is to be connected to an Ethernet network.
Transmission Speed
—Select Auto Detect if your network environment is mixed, or
select the speed (10 Mbps or 100 Mbps) of the network to which the Fiery 3850C is
attached.
Parallel Port (Port Setup)
Enable Parallel Port
—Select if you want to print through the parallel port. You can
connect a single Windows computer to the parallel port and print directly to the
Fiery 3850C.
N
OTE
:
Enabling the parallel port does not conflict with using Ethernet or Token Ring
communication to the Fiery 3850C.
Ignore EOF Character
—Available only if Enable Parallel Port is selected, this option
specifies that the Fiery 3850C should ignore end-of-file (EOF) messages. Check this
box to print PostScript files in binary format (not ASCII); under normal
circumstances, the box should not be checked. When this option is selected, the
Fiery 3850C uses the parallel port timeout value to determine when the end of the file
has been reached.
Parallel Port Timeout (seconds)
—Available only if Enable Parallel Port is selected, this
setting determines how long the Fiery 3850C waits without receiving data from the
parallel port before deciding that the current job is complete. Until the timeout, the
Fiery 3850C cannot receive new jobs through the parallel port, but it can continue to
receive network print jobs.
