6
6-4
Administering the Fiery 3850C
•
Make sure you have adequate disk space on the Fiery 3850C
Periodically review the list of jobs in the Hold queue, and the number of jobs being
retained in the Printed queue.
An administrator can print or delete jobs that are in the Printed queue and Hold
queue. Consider printing or offloading inactive jobs. If disk space on the Fiery 3850C
is frequently low, you can disable the Printed queue (in System Setup).
To move or remove queued jobs, use the job management tools. When you free up disk
space by removing inactive jobs, new jobs are spooled and printed more quickly.
Troubleshooting the Fiery 3850C
Startup diagnostics are described in the
Installation and Service Guide
for service
technicians. Contact your authorized service/support center if you see any startup error
messages or if the Fiery 3850C does not reach Ready status.
Troubleshooting during Setup from the Control Panel
The following section explains some error and alert messages that you may see during
Setup that might not be self-explanatory.
Network Setup messages
After this Setup screen:
This message:
Means:
Enable AppleTalk
No AppleTalk zone found.
The Ethernet network cable is not attached to the
connector on the Fiery 3850C, or the network cable is not
plugged into the hub or network. If your AppleTalk
network has zones, and you want to specify a zone for the
Fiery 3850C, you must connect the network cable to the
Fiery 3850C before performing AppleTalk Setup.
Also could mean that the AppleTalk network does not have
zones. Zones are not required for printing to the
Fiery 3850C. Press OK to continue.
Protocol Setup or Service
Setup (Network Setup)
You must first enable
a network port.
Frame Type selection
Invalid frame size.
The network hub is not connected to a Novell machine
when the Fiery 3850C tries to bind.