1
1-12
Connecting to the Network
Ethernet cable connection
For connecting to Ethernet, the Fiery 3850C supports Unshielded Twisted Pair (UTP)
cabling, defined as Category 5 for use with 100BaseT; or as Category 3, Category 4, or
Category 5 for use with 10BaseT. The cable uses an 8-pin RJ-45 connector that plugs
into the RJ-45 socket on the Fiery 3850C.
N
OTE
:
The 100BaseT type supported by the Fiery 3850C is 100BaseTX, also known as
Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term
“100BaseT” is used to refer to 100BaseTX.
T
O
CONNECT
TO
THE
E
THERNET
BOARD
:
•
Connect the network cable to the RJ-45 connector on the back of the Fiery 3850C.
A Category 5 unshielded twisted pair cable network cable must be used for 100BaseT.
