manualshive.com logo in svg

Ricoh Aficio AP3850C, Configuration Manual, Page: 47 / 140

Share
Download
Ricoh Aficio AP3850C Configuration Manual Download Page 47

3

3-12

Performing Setup from the Control Panel

Port Timeout 
5-300 [15]

This option appears only if Parallel Port is set to On. Your setting determines how long 
(in seconds) the Fiery 3850C waits without receiving data from the parallel port before 
deciding that the current job is complete. Until the timeout, the Fiery 3850C cannot 
receive new jobs through the parallel port, but it can continue to receive network print 
jobs.

Ignore EOF
Yes/No [Yes]

This option appears only if Parallel Port is set to On. This option specifies that the 
Fiery 3850C should ignore end-of-file (EOF) messages in a file. This option must be 
set to Yes to print PostScript files in binary format (not ASCII); under normal 
circumstances, it should be set to No. When this option is set to Yes, the Fiery 3850C 
uses the parallel port timeout value to determine when the end of the file has been 
reached. If you experience printing problems, set this option to No.

Protocol Setup options

TCP/IP Setup - Ethernet

To configure the Fiery 3850C, choose each protocol and enter the settings for that 
protocol. 

TCP/IP-Ethernet
Yes/No [Yes]

Select Yes if you have a TCP/IP network connected to the Fiery 3850C over 
Ethernet cabling.

N

OTE

:

If you are using TCP/IP for printing from Windows computers, enabling 

TCP/IP here also enables you to use Fiery utilities from Windows computers using 
TCP/IP protocols.

Summary of Contents for Aficio AP3850C













































































































































Reviews:

No comments