5
5-3
Fiery 3850C on a NetWare 5.x network with NDPS
Configuring a NetWare 5.x server for printing
Before you begin
The following procedure assumes NDPS has been installed during NetWare 5
installation and that a Broker is running on the server. Unless you have manually
unloaded the Broker, it loads and runs when you install NDPS. Make sure you are
using the latest NetWare 5.x service pack and Novell Gateway. Finally, create an NDPS
Manager. For more information, see your NetWare documentation.
In Fiery 3850C Setup, make sure you have enabled TCP/IP (page 3-12) on the
Fiery 3850C. You can ping the Fiery 3850C (page 5-21) to verify that TCP/IP
communication is successful.
Setting up the Fiery 3850C printer driver
You first need to create a directory for Windows NT 4.0/2000 or a folder for Windows
95/98/Me in the NetWare server for NDPS to install the corresponding printer driver
files from the User Software CD.
T
O
SET
UP
THE
PRINTER
DRIVER
FOR
W
INDOWS
NT 4.0/2000
1.
Log in to the Novell file server as a superuser or Administrator.
2.
In the SYS:ndps\resdir\Prndrv\NT4/2000 directory, create a directory called Fiery.
3.
From the User Software CD, copy the contents of the
ENGLISH\PS_DRVR\WIN_NT4x/2000 or ENGLISH\PCL_DRVR\WIN_NT4x/2000
folder to the Fiery directory.
T
O
SET
UP
THE
PRINTER
DRIVER
FOR
W
INDOWS
95/98/M
E
1.
Log in to the Novell file server as a superuser or Administrator.
2.
In the SYS:ndps\resdir\Prndrv\Win95/98/Me directory, create a folder called Fiery.
3.
From the User Software CD, copy the contents of the
ENGLISH\PS_DRVR\WIN_9x_ME or ENGLISH\PCL_DRVR\WIN_9x_ME folder to the Fiery
directory.
