3
3-16
Performing Setup from the Control Panel
For protocols other than IPX/SPX, the frame type is automatically enabled and does
not require setup, as follows:
With this protocol:
And these printing services:
This frame type is
automatically enabled:
AppleTalk
PAP (Printer Access
Protocol)
Ethernet SNAP
TCP/IP with Ethernet
LPD (Line Printer Daemon)
Ethernet II
Auto Frame Type
Yes/No [Yes]
Specify whether the Fiery 3850C should try to bind to all available frame types
automatically. The Fiery 3850C does so whether or not all frame types are
appropriate. To determine the frame types that were successfully bound, save your
changes, exit Setup, allow the Fiery 3850C to reboot, and print a Configuration page.
The Configuration page lists only one of the frame types that were successfully bound.
If you answer No to this option, you can select frame types manually. You must choose
at least one frame type to enable IPX/SPX protocols.
Select Frame Types
The frame selection screen allows you to make multiple selections. Press Enter to select
the frame type used on your IPX/SPX network. You can choose to enable Ethernet
802.3, Ethenet 802.2, Ethernet II, and Ethernet SNAP.
Select all the frame types that are appropriate for your network. An asterisk (*) appears
beside each selected frame type.
