3
3-24
Performing Setup from the Control Panel
Once you have chosen a file server, the Fiery 3850C immediately tries to log in as a
guest without a password. If it succeeds, it skips to the NetWare Print Server option.
If you try to add a file server but all Fiery 3850C connections are already being used,
you are prompted to remove a file server (see “Remove FServer” on page 3-27).
File Server Login
administrator/supervisor/Enter Login Name [supervisor]
This option appears only if a password is required for login or if there is no guest
account or the guest account is restricted. Choose Enter Login Name to enter your
own login name and password or to log in as a guest. Choose administrator or
supervisor if you have those privileges.
Enter Login Name
[guest]
This option and the next appear only if you selected Enter Login Name for the File
Server Login. Enter your login name or select guest.
FServer Password
Enter the password for logging in to your NetWare file server.
NetWare Print Server
Print Server Name
Select the name of the print server that you have configured in the NetWare utility
PCONSOLE. This is the print server that will route print jobs to the Fiery 3850C
from computers on IPX networks.
Choose Yes to Another FS until you have connected each NetWare file server you have
configured for printing to the Fiery 3850C.
You can choose another Bindery Setup option (such as adding another file server) or
proceed to set the polling interval.
