5
5-16
Setting up Network Servers
•
Print a Configuration page (see page 3-38).
Use the information on this page to determine the current Fiery 3850C settings.
•
Load the TCP/IP network protocol (for Windows 9x/Me/2000 only, also load Client for
Microsoft Networks) on the computer.
•
Verify the Workgroup name of the computer in the Windows Network control panel.
Make sure the Workgroup name is the same as the one listed in Fiery 3850C Setup.
•
For Windows 9x/Me/2000 only, in the Windows Network control panel, configure the
computer to allow file sharing, and then restart the computer.
•
Ping the Fiery 3850C (see page 5-21) to verify TCP/IP communication is successful.
Configuring the Fiery 3850C and clients for
Fiery WebTools
The Fiery WebTools provide access to many Fiery 3850C functions via the Internet (or
intranet), providing additional flexibility in remote management. You can access the
Fiery WebTools from a Windows or Mac OS computer.
T
O
SET
UP
F
IERY
W
EB
T
OOLS
ON
THE
F
IERY
3850C:
1.
In Fiery 3850C Network Setup, enable TCP/IP.
2.
Set a valid, unique IP Address for the Fiery 3850C, and then set the subnet mask. Set
a gateway address if necessary.
3.
In Fiery 3850C Printer Setup, confirm the Print Queue
is published.