manualshive.com logo in svg

Ricoh AC204, Operating Instructions Manual

Share
Download
Ricoh AC204 Operating Instructions Manual Download Page 81

P

RINTING

5.20

About Tab

The About tab gives you the program version number.

Printer Properties Buttons & Icons

• Click OK when you finish reviewing or making changes.

• Click Cancel if you want to exit the tab menus without 

applying any changes.

• Click Help to view the online Help feature and tab menu 

details.

• Click the ? icon in the title bar to get information about 

specific setting on the page. Position the ? pointer over the 
parameter in question and click to see a pop-up window for 
an explanation.

Setting Up the Locally Shared 
Printer

You can connect the machine directly to a selected computer, 
which is called “host computer,” on the network. Your machine 
can be shared by other users on the network through a Windows 
9x, Me, 2000, XP or NT 4.0 network printer connection. 

N

OTE

:

 Whether the printer is locally connected or network-

connected, you need to install the printer software on each 
computer that will print documents to the printer.

In Windows 9x/Me

Setting Up the Host Computer

1

Start Windows.

2

From the Start menu, select Control Panel and 
double-click on the Network icon. 

Summary of Contents for AC204

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands