Ricoh AC204, Operating Instructions Manual

Page: 56 / 192

C
OPYING
4.9
4
Auto Fit Copying
This feature automatically reduces or enlarges the original
image to fit on the paper currently loaded in the machine, so you
don’t need to adjust the copy size.
This special copy mode is only available when using document
scanner glass. If a document is detected in the ADF, the auto-fit
will not work.
1
Load the document to be copied on the document glass,
and close the cover.
2
Make sure that you have selected the required paper tray.
See page 4.2.
3
To enter the special copy mode, Users should press Special
Copy in the Copy mode (see page 4.5).
4
Press Special Copy repeatedly or use the navigation
buttons until “AUTO FIT” appears on the bottom line of the
display.
5
Press Mode/Enter to save the selection.
6
If necessary, customise the copy settings including the
number of copies, contrast and image type using the
control panel buttons. See “Setting Copy Options” on
page 4.6.
N
OTE
:
You cannot adjust the copy size using the
Zoom
button
while Auto fit is enabled.
7
Press Start to begin copying.
8
When copying is completed, press Clear/Stop to cancel
the Auto Fit mode.