O
THER
W
AYS
TO
F
AX
5.3
5
3
Press Menu/Exit and then Delay TX on the one-touch dial
keypad.
4
Enter the number of the remote machine using the number
keypad.
To enter the number, you can also press a one-touch
button, or press Speed/Status and enter a speed dial
number including a group dial number.
5
Press Mode/Enter to confirm the number on the display.
The display asks you to enter another fax number to send
the document too.
N
OTE
:
A single broadcast (sending to multiple destinations) is
available for your machine, so the “ANOTHER NO.” prompt does
not appear if any broadcast is currently set up and is not
completed.
6
To enter another fax number, select “1.YES” and repeat
from step 4. You can add up to 25 destinations.
Note that you cannot use group dial numbers as another fax
number.
7
To send to one location or when you complete the last fax
number setting, select “2.NO”.
8
The display asks you to enter a name. If you want to assign
a name to the transmission, enter the name. If not, skip
over this step.
For details on how to enter the name using the number
keypad, see “Entering Characters Using the Number
Keypad” on page 1.6.
9
Press Mode/Enter. The display shows the current time and
asks you to enter the start time when the fax is to be sent.
10
Enter the time by using the number keypad.
Summary of Contents for AC204
