Ricoh 9100DN - Aficio SP B/W Laser Printer, Software Manual

Page: 250 / 344

Message Problem and solutions
sap enable, saptype=<SAP type>, sapname=<SAP
name> The SAP function has started. The SAP packet is is-
sued to advertise the service on the SAP table on
the NetWare server.
server identity invalid The server ID is disabled. Check the server authen-
tication.
session IPv4 <community name> not defined. The requested community name is not defined.
session IPv6 <community name> not defined. The requested community name is not defined.
session <community name> already defined. The requested community name is not defined.
session_ipx <community name> not defined. The requested community name is not defined.
Set context to <NDS contextname> An NDS context name has been set.
smbd start. (NETBIOS) The smbd service has started.
SMTPC: failed to get smtp server ip-address. The SMTP server IP address could not be obtained.
This could be because:
• The specified DNS server could not be found.
• No connection to the network has been es-
tablished.
• The specified DNS server could not be found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address could
not be found in the DNS server.
SMTPC: failed to connect smtp server. timeout. Connection to the SMTP server failed due to time-
out. This could be because the specified SMTP
server name is incorrect, or no connection to the
network has been established, or the network con-
figuration is incorrect, so there is no response from
the SMTP server. Check the SMTP server name, or
the network connection and configuration.
SMTPC: refused connect by smtp server. Connection to the SMTP server is denied. This could
be because server other than the SMTP server has
been specified, or the specified SMTP server port
number is incorrect. Check the SMTP server name,
port number, or the SMTP server port number.
5. Monitoring and Configuring the Printer
248
5