Ricoh 9100DN - Aficio SP B/W Laser Printer, Software Manual

Page: 204 / 344

• The IP address, subnet mask and broadcast address are the same as that for the ethernet interface
and IEEE 802.11b interface.
• TCP/IP configuration is the same for both Ethernet and IEEE 802.11 interface. If interfaces are
changed, the new interface inherits the configuration.
• Use "0x" as the initial two letters of a hexadecimal address.
info
Use the "info" command to display printer information such as paper tray, output tray, and printer language.
Printer information display
msh> info
• For details about displayed contents, see p.224 "Getting Printer Information over the Network".
ipp
Use the "ipp" command to view and configure IPP settings.
Viewing settings
The following command displays the current IPP settings:
msh> ipp
IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupted print job. The time
can be entered between 30 to 65535 seconds.
msh> ipp timeout [30 - 65535]
IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is "off".
msh> ipp auth {basic|digest|off}
• User authorization settings are "basic" and "digest".
• Use "off" to remove a user's authorization.
• If user authorization is specified, register a user name. You can register up to 10 users.
IPP user configuration
Configure IPP users according to the following messages:
msh> ipp user
The following message appears:
5. Monitoring and Configuring the Printer
202
5