Ricoh 9100DN - Aficio SP B/W Laser Printer, Software Manual

Page: 249 / 344

Message Problem and solutions
Name registration success. WINS Server=<WINS
server address> NetBIOS Name=<NetBIOS
name> Name registration of <NetBIOS Name> to <WINS
server address> was successful.
Name registration success in Broadcast
name=<NetBIOS Name> Name registration by Broadcast name of <Net-
BIOS Name> was successful.
Name registration failed. name=<NetBIOS name> Name registration of <NetBIOSName> failed.
Change to different NetBIOS name.
nbtd start. The nbtd service has started.
nprinter start (Netware) (In the remote printer mode) The NetWare service
has started.
nwstart start. (NetWare) The service for NetWare protocol stack setting has
started.
Open log file <file name> (In the print server mode) The specified log file has
been opened.
phy release file open failed. Replacing the network interface board is required.
Contact your sales or service representative.
Print queue <print queue name> cannot be serviced
by printer 0, <print server name> (In the print server mode) The print queue cannot
be established. Make sure that print queue exists
on the specified file server.
Print server <print servername>has no printer. (In the print server mode) The printer is not assigned
to the print server. Using NWadmin, assign the
printer, and then restart it.
print session full No more print jobs can be accepted.
Printer <printer name> has no queue (In the print server mode) The print queue is not
assigned to the printer. Using NWadmin, assign the
print queue to the printer, and then restart it.
pserver start. (NetWare) (In the print server mode) The NetWare service has
started.
Required file server (<file servername>) not found The required file server is not found.
received EAP Failure EAP reception failed.
restarted. The lpd service has started.
Message List
247
5