Ricoh 161 Function Manual Download Page 125

Page: 125 / 192

Receiving Internet Fax Documents

117

E-mail transmitted without speci-

fying a subject in “E-mail Options”.

E-mail transmitted with a subject

specified in “E-mail Options”.

From

The name (e-mail address) of the sender

Date

The date and time of e-mail transmission

The e-mail address of the recipient

Subject

Shows the subject specified in “E-mail
Options” at the time of transmission. If
no subject is specified, one is automati-
cally assigned in the format shown in 1
above.

The message is inserted in all e-

mail. “xxxx” is the machine name.

Attachment File

Any document included by the sender is
displayed as an attached document.

Note

❒

The display format of the sender name differs according to that of the Stamp
Sender Name setting and other functions.

❒

The display format of the subject varies according to Stamp Sender Name and
other settings.

Reference

p.31 “E-mail Subject”
“System Settings”, General Settings Guide

ALV011S

Summary of Contents for 161

































































































































































































Search results

Summary of Contents for 161

Reviews:

Related manuals for 161

Brands by name

Popular brands

Ricoh 161, Function Manual

Search results

Summary of Contents for 161

Reviews:

Related manuals for 161

Brands by name

Popular brands