manualshive.com logo in svg

Ricoh 161, Function Manual

Canon 161 Manual: Simplify your user experience with our comprehensive, easy-to-follow user manual for Canon 161. Available for free download at manualshive.com, this manual provides step-by-step instructions and handy tips to optimize your device's performance. Empower yourself with the knowledge you need to master this fantastic product effortlessly.

Share
Download
background image

2

I

Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or corpora-
tion commission for information.

J

If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this equipment does not dis-
able your alarm equipment. If you have questions about what will dis-
able alarm equipment, consult your telephone company or a qualified
installer.

❖

WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS
TO EMERGENCY NUMBERS:

A

Remain on the line and briefly explain to the dispatcher the reason for
the call before hanging up.

B

Perform such activities in the off-peak hours, such as early morning
hours or late evenings.

❖

CANADA

This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to the re-
quirement that the sum of the RENs of all the devices does not exceed five.

❖

Note to users in the United States of America

❖

Note:

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interfer-
ence by one more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

❖

Caution:

Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

Summary of Contents for 161

































































































































































































Reviews:

No comments

Related manuals for 161

Xerox All in One Printer Product Safety Data Sheet preview
All in One Printer
Brand: Xerox Pages: 3
Oki C831 Safety And Warranty Manual preview
C831
Brand: Oki Pages: 48
Lexmark Jetprinter Disney Edition Z615 Series Quick Start Manual preview
Jetprinter Disney Edition Z615 Series
Brand: Lexmark Pages: 2
Fargo Persona C25 Printer Selection Manual preview
Persona C25
Brand: Fargo Pages: 6
Fargo DTC4500e User Manual preview
DTC4500e
Brand: Fargo Pages: 90
Fargo DTC1000 User Manual preview
DTC1000
Brand: Fargo Pages: 126
FARGO electronics FARGO DTC 400 User Manual preview
FARGO DTC 400
Brand: FARGO electronics Pages: 278
Canon MP490 series Getting Started preview
MP490 series
Brand: Canon Pages: 32
Geeetech PrusaI3 X User Manual preview
PrusaI3 X
Brand: Geeetech Pages: 52
Xerox DocuPrint 180 Quick Reference Card preview
DocuPrint 180
Brand: Xerox Pages: 2
Xerox 8200DX - Phaser Color Solid Ink Printer Manual preview
8200DX - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 2
Keithley Model 750 Instruction Manual preview
Model 750
Brand: Keithley Pages: 97
FujiFilm 16558126 User Manual preview
16558126
Brand: FujiFilm Pages: 28
Triumph Adler P-C2665 User Manual preview
P-C2665
Brand: Triumph Adler Pages: 202
Roland SJ-1045EX User Manual preview
SJ-1045EX
Brand: Roland Pages: 116
Citizen CBM-810 User Manual preview
CBM-810
Brand: Citizen Pages: 32
Canon PIXMA MP520 Start Here preview
PIXMA MP520
Brand: Canon Pages: 2
Canon PIXMA MG7120 Manual preview
PIXMA MG7120
Brand: Canon Pages: 4

Brands by name

Popular brands

Load more brands