Configuration
15
Four front panel keys are used as directional keys to navigate through the menus in setup mode (see Figure 3-2).
The
UNITS
( ) and
( ) keys scroll left and right (horizontally) on the same menu level;
ZERO
( ) and
GROSS/NET
( ) move up and down (vertically) to different menu levels. The
TARE
key ( ) serves as an Enter
key for selecting parameter values within the menus. A label over each of these keys identifies the direction
provided by the key when navigating through the setup menus.
Figure 3-3. Setup Mode Menu Navigation
To select a parameter, press or to scroll left or
right until the desired menu group appears on the
display, then press to move down to the submenu or
parameter you want. When moving through the menu
parameters, the default or previously selected value
appears first on the display.
To change a parameter value, scroll left or right to
view the values for that parameter. When the desired
value appears on the display, press to select the
value and move back up one level. To edit numerical
values, use the numeric keypad on the indicator front
panel.
3.2
Menu Structures and Parameter Descriptions
The following sections provide graphic representations of the IQ plus 710 menu structures. In the actual menu
structure, the settings you choose under each parameter are arranged horizontally. To save page space, menu
choices are shown in vertical columns. The factory default setting appears at the top of each column. Parameters
shown surrounded by a dotted-line box only appear under the special circumstances explained under each box.
Most menu diagrams are accompanied by one or more tables that describe all parameters and parameter values
associated with that menu option. Default parameter values are shown in bold type.
1
st
Level
Parameter
Default value
2
nd
Level
Parameter
Value
Value
Value
1
st
Level
Parameter
2
nd
Level
Parameter
When moving through values below the first menu level, press
to return to the level
above. Press
or
to move to the
next
parameter on the level above.
