50
IQ plus 710 Installation Manual
7.1.1
Modes 1 and 2
In modes 1 and 2, the indicator erases truck ID
numbers and tare weights from memory after the
transaction.
1. The truck moves onto the scale for weigh-in.
2. If keyed tares are enabled (Mode 1), key in
the desired tare weight and press
TARE
.
3. Key in an ID number (up to 7 digits) and press
ID
. This information remains in memory until
the weigh-out ticket is printed.
4. The indicator prints the weigh-in ticket
(TRWIN format) shown below:
ID. NO. 304812
GROSS 15000. LB INBOUND
08/04/1998 10:24 AM
5. The loaded truck moves onto the scale for
weigh-out.
6. Key in the ID number from the weigh-in
ticket and press
. The indicator prints a
weigh-out ticket (TRWOUT format) and
automatically clears the information from
memory: If the tare weight is a keyed tare, the
word
KEYED
is printed after
RECALLED
on the
tare line.
7.1.2
Modes 3, 4, 5, and 6
In modes 3–6, the indicator stores the tare weights and
ID numbers in memory until you manually erase
them.
1. The truck moves onto the scale for weigh-in.
2. If keyed tares are enabled (Modes 3, 5), key in
the desired tare weight, then press
TARE
.
3. Key in an ID number (up to 7 digits) and press
I.D
. This information remains in memory until
manually deleted.
4. The indicator prints the weigh-in ticket
(TRWIN format). Truck leaves.
5. The loaded truck moves back onto the scale
for weigh-out.
6. Key in the ID number and press
. The
i n d i c a t o r p r i n t s t h e w e i g h - o u t t i c k e t
(TRWOUT format). If value swapping is
enabled (modes 3 and 4), the lower weight is
always printed as the tare weight.
ID. NO. 304812
GROSS 100000. LB
TARE 15000. LB RECALLED
NET 85000. LB
08/04/1998 10:55 AM
7.1.3
Single-Transaction Tare Weights and IDs
Version 1.44 supports temporary tare weights for
indicators configured to use stored IDs (TARE100
modes 3–6). This function allows one-time weighing
of trucks without adding the truck ID and tare weight
to the indicator database.
To use this function, enter a truck ID containing a
decimal point, then press
I.D.
Tare weights and Truck
IDs entered using decimal truck IDs are erased from
the indicator database when the transaction is
complete.
